This Speedster came to the shop before long weekend. It had just an old radio with old speakers. And there is only two speakers but customer wants more! He need loud system and just two speakers in the back is not enough.
The boat have a tower, so we decided to put extra speakers on the tower. But sometimes, customer using his boat without this tower, so we must install speakers and keep in mind that they should be disconnected and connected back easy and quick.
SEADOO Speedster audio system equipment list
Head unit – Clarion M505
Amplifier 4 channel Clarion XC2410
Speakers (factory location) Clarion CMG1722R
Speakers (tower) CLARION CM7123T 8” x 12” INCH MARINE TOWER SPEAKER
Here is the boat and you can see the tower. First- we installing the head unit and amplifier
New radio have 1DIN size, so it fits perfect in the factory location and we still can you the waterproof cover
Amplifier hidden on top of the dash panel
Speakers for the factory location installed and ready to play!
Time to install tower speakers. These CLARION CM7123T speakers have 8” x 12” inch size. So they are bigger than regular 6.5 or 7 inch speakers, but this speakers more effective and can produce more bass and can handle 200W music power!
Using special “tower adapters” from the kit we got those speakers installed on the tower
As you can see- we’ve run the wires by the tower and here is our secret
We made quick release connector with waterproof cover. So when it’s time to take off the tower- just unplug this connector, close the cover and put this end of speaker cable to the trunk. When the tower goes back on the boat- take cable- plug it in and enjoy your music!
Here some more pictures of the system.
And one more thing- you can buy this propylene covers for speakers and cover them when it’s not in use.
Should i tell you how loud is this boat? 🙂
If you have same or even bigger boat- contact us and ask about your new marine system!